Advertisement
Refit the door panel (
Removing the internal door window scraper seal
The following procedure is for removing the internal scraper seal for the right hand door window.
The procedure for removing the internal scraper seal for the left hand door window is the same.
E3.08).
Fit the plate (D) in the relative seat.
Fit the door release lever (C) in the relative seat,
pressing downward.
Check that the lever (C) is parallel with the door
panel and moves without impediment.
Fit the internal handle (B) in the relative seat,
fitting the upper part on the door panel and
the lower part on the door release lever (C).
Tighten the two upper screws indicated fastening
the internal handle to the relative mounting
bracket (A).
Advertisement
