Advertisement
E2.02
Front removable subframe
Removing the front removable subframe
Remove the internal engine compartment cross brace (
Remove the central flat undertray section (
E2.04).
E3.12).
When installing the strap for lifting the
engine, take care not to crush or bend
any of the cables and pipes of the
different systems.
Harness the engine with a suitable safety strap
(1), passing the strap between the engine
struts and the exhaust manifold - catalytic
connector connection.
Fit the ends of the safety strap (1) on the intake
manifold, taking care not to crush any cables
or pipes.
Place the commercially available lift bar (OMCN
art. 275 A) on the engine compartment
subframe, orienting the bracket (2) correctly.
Adjust the height of the bracket (2) so that the lift
bar (OMCN art. 275 A) is above the intake
manifold.
Use a shim (3) to compensate for any
differences in level under the bracket (2).
Lock the ends and extensible parts with the
handles (4).
Repeat the aforementioned procedure on the
opposite end of the tool.
Advertisement
