Advertisement
Tightening torque
Fastening silencer connector cross member
Never reuse exhaust system clamps and gaskets that have been subjected to operating temperature.
Always replace with new components.
Only new exhaust system clamps and gaskets may be removed and refitted for adjustment purposes
during initial installation.
The rear removable subframe must be correctly located on the pins of the lift trolley
during the removal procedure.
Screw
Nut
Tighten the eye bolts in the relative holes on the
gearbox and fit tool
Connect to a mobile hydraulic jack and lift the
gearbox, locating in the relevant seat on the
rear removable subframe.
Apply AREXONS SYSTEM TG248 - ADHESIVE
GREASE on the entire threads of the pins
(88) and to the respective seats.
Fit the pins (88) on the rear gearbox mounting
bushings, installing the washers (87) and
shims (86), without tightening.
Nm
Class
25 Nm
B
25 Nm
B
(AS
107565), as
(AS
107564).
Advertisement
