Advertisement
ONLY for vehicles WITH single oil heat exchanger
Refit the single oil heat exchanger mounting subframe (
Refit the water/gear oil/clutch hydraulic system oil single oil heat exchanger (
ONLY for vehicles WITH single oil heat
exchanger
Fit the shim (18).
Fasten the ATF pipes (72) to the gearbox,
tightening the indicated nuts.
Tightening torque
Nut / Screw
ONLY for vehicles WITH single oil heat
exchanger
Clean the area surrounding the GL fluid pipe
fastening points thoroughly with a suitable
degreaser that does not leave residue.
Place absorbent paper under the plugs to catch
any oil spillage.
Remove the plugs installed previously.
Replace the O-rings of the GL fluid delivery and
return pipes (69), lubricating the new
components before installation.
Fit and connect the GL fluid delivery and return
pipes (69).
Fit the GL pipe retainer fork (71) and tighten the
screw (70).
Tightening torque
Screw
C2.05).
Nm
Class
8 Nm
Nm
Class
20 Nm
C2.05).
B
A
Advertisement
