Download Print this page

Ferrari California Workshop Manual page 501

Hide thumbs Also See for California:

Advertisement

Check the alignment of the exhaust system (
Refit the rear wheelhouses (
Refit the rear sections of the rear wheelhouses.
Refit the rear brake calliper (
Refit both.
Refit the wheels (
Refit the rear wheels.
FROM Assembly No. 103179 (consult the Spare Parts Catalogue to identify vehicles not affected by
modification). Replace the EPB ECU (
It is not necessary to replace the aforementioned ECU. Simply connect the EPB ECU Bowden cable
and fit the respective cable grommet.
Connect the battery (
Check the Shell Transaxle 75W-90 GL5 gear oil level (
Inspect the hydraulic clutch system oil level Shell DCT F-3 (
ONLY for vehicles WITH single oil heat exchanger. Fill the cooling system (
Refit the rear flat undertray section (
Refit the rear flat undertray diffuser (
Lower the vehicle using anti-tipping safety retainers (
Calibrate the EPB electric parking brake (
This procedure must only be performed if, at Key-ON, the NPB parking brake node identifies a fault,
indicated on the instrument panel and on the TFT display by the specific warning lamps, and with
error C155A on the NPB (EPB calibration error) and error C1313 on the NFR (parking brake
error).
E3.05).
D3.05).
D2.01).
F2.01).
E3.12).
E3.12).
FROM Assembly No. 103179 (consult the Spare
Parts Catalogue to identify vehicles not
affected by modification)
Fit the connector cross member (Z).
Tighten the nuts indicated.
Tightening torque
Nut
B7.01).
F2.11).
A3.02).
A3.03).
E3.12).
D3.07).
Nm
Class
25 Nm
A3.07).
B

Advertisement

loading