Advertisement
Use a suitable screwdriver to prise the clip (1) off the EPB linkage
bracket.
Detach the end (2) of the right hand EPB Bowden cable (B) from the
EPB linkage bracket (A)
Press on the two indicated fastener tabs and remove the right hand
EPB Bowden cable sheath (B) from the relevant mounting bracket.
Left hand EPB Bowden cable
Move the EPB equaliser (C) to the left.
Detach the end (3) of the left hand EPB Bowden cable (D) from the
EPB equaliser (C).
Press on the two indicated fastener tabs and remove the left hand EPB
Bowden cable sheath (D) from the relevant mounting bracket.
Undo the nut (4) fastening the right hand EPB Bowden cable (B)
retainer bracket (E).
Detach the cable grommet (5) from the bracket on the right hand EPB
Bowden cable sheath (B).
Undo the nut (6) fastening the ground cable onto the bracket on the
right hand EPB Bowden cable sheath (B).
Undo the screw (7) fastening the right hand EPB Bowden cable sheath
(B) onto the rear right hand hub carrier.
Advertisement
