Advertisement
Runway type vehicle lift
Refit the pads (A) on the relative arms on the car
lift.
Lower the vehicle lift runways until the car is the
desired height from the ground.
Loosen the screws (3) fastening the positioning
levers (6).
Tighten the positioning levers (6).
Turn the positioning levers (6) by 180°.
Tighten the screws (3) fastening the positioning
levers (6).
Carefully lower the runways of the vehicle lift to
gently set the vehicle on the ground, ensuring
that the anti-tipping safety retainers withdraw
completely and without impediment from the
respective fastener slots on the vehicle.
Undo the indicated screws fastening the upper
plates (1) and lower plates (2) of the brackets
(AV
8184) fastening anti-tipping safety
retainers
(AV
8183).
Remove the lower plates (2) fastening the anti-
tipping safety retainers from the safety
extensions on the car lift runways.
Remove the upper plates (1) fastening the anti-
tipping safety retainers from the safety
extensions on the car lift runways.
Advertisement
