Advertisement
FROM Assembly No. 103179 (consult the Spare Parts Catalogue to identify vehicles not affected by
modification)
Fit the engine mounting bush spacers in the respective seats on the front removable subframe.
Fit the front removable subframe, supporting its weight adequately.
Hand tighten the screw (18).
Tighten some of the screws indicated.
The screws are not all the same length. Before
applying the screws, refer to the notes made
during removal to ascertain which screws
correspond to which positions.
Undo the alignment pins
Pre-tighten the indicated screws.
Tightening torque
Screw (pretightening)
Tighten the indicated screws in the sequence
given.
Tightening torque
Screw
(AV
8350).
Nm
Class
20 Nm
B
Nm
Class
60 Nm
B
Advertisement
