Advertisement
Dynamic filling (engine on) (ONLY for vehicles WITHOUT Single oil heat exchanger)
After loosening or removal, the Caillau Visa hose clamps must be replaced with Mikalor worm drive
hose clamps, following the instructions given in Technical Information 2054 of December 2012.
11) Gradually introduce coolant via the
expansion tank filler orifice, until fluid escapes
from the delivery pipe (3) leading to the heat
exchanger.
12) Fasten the delivery pipe (3) leading to the
heat exchanger by tightening the union (2),
after replacing the relative seals.
Tightening torque
Pipe union
13) Complete filling up to the MAX level
indicated on the expansion tank.
Nm
Class
50 Nm
A
Advertisement
