Advertisement
B7.01
Exhaust system layout
A - Exhaust manifolds
B - Catalytic converters
C - Centre silencer
D - Exhaust extensions
E - Silencers
Checking exhaust system alignment
The following procedure is necessary whenever any work on the components of the exhaust system is performed.
Remove the rear flat undertray diffuser (
Remove the rear flat undertray section (
Remove the rear wheelhouses (
Remove the rear elements of the rear wheelhouses.
Checking alignment along "X" axis
E3.12).
E3.12).
E3.05).
Measure the protrusion of the indicated pins of the exhaust
extensions between the surface of the vibration damper (1)
and the base of the head of the pin.
The protrusion of the pins indicated must be ≥ 24 mm.
Advertisement
