Advertisement
Fit and install the torsion damper (B) fully into its
seat.
Immobilise the crankshaft.
Apply Loctite 242 to the thread of the indicated
screw.
Tighten the indicated screw, fitting the respective
washer.
Tightening torque
Screw
Fit the tensioner (A).
Tighten the indicated screw.
Tightening torque
Screw
Tighten the screws (5) and (6) in a cross pattern.
Tightening torque
Screw
Nm
Class
450 Nm
A
Nm
Class
25 Nm
B
Nm
Class
10 Nm
B
Advertisement
