Advertisement
Turn the positioning levers (7) until the eccentric
pin head (4) retracts into the correct position
to allow the insertion of the anti-tipping safety
retainers into the relative fastener slots.
Completely tighten the screws (9) fastening the
positioning levers (7).
Lower the vehicle lift arms, without allowing the
screws (9) fastening the positioning levers (7)
to come into contact with the floor, as this
may damage the anti-tipping safety retainers.
Removing the gearbox
Detach and remove the plugs (B) from the rear
fastener slots.
Removing the engine
Detach and remove the plugs (C) from the front
fastener slots.
Advertisement
