Advertisement
A3.16
Checking injection and ignition system pipes and connections
Checking injection and ignition system pipes and connections
Remove the lateral flat undertray sections (
Check the state of the connection pipes between the fuel tank and the high pressure pump, and of the fuel
rail on the intake manifold.
In the event of leakage, replace the pipe and check the system.
Remove the front wheelhouses (
Remove the rear elements from both wheel bays.
Check the state of the cables and connectors for the Motronic ECUs and the coils. If the outer casing or
the connector locks are damaged, replace the cable.
In the event of malfunction, check the spark plugs. Replace the spark plugs at the intervals indicated in the
maintenance schedule.
E3.12).
E3.05).
Advertisement
