Advertisement
Connect the connector (10) to the airbag ECU.
Fit the lower right hand mounting bracket (9) for
the dashboard (A) in its respective seat and
tighten the two lower fastener nuts and the
two upper fastener screws.
Tighten the two screws indicated fastening the
lower right hand mounting bracket (9) for the
dashboard (A) to the dashboard subframe.
Tightening torque
Screw
Tighten the two nuts indicated fastening the
lower right hand mounting bracket (9) for the
dashboard (A) to the centre console.
Tightening torque
Nut
Tighten the screw indicated fastening the lower
right hand mounting bracket for the
dashboard (A) to the bodyshell.
Tightening torque
Screw
Connect the connector (8) on the right-hand side
of the dashboard.
Nm
Class
8.5 Nm
B
Nm
Class
8.5 Nm
B
Nm
Class
8.5 Nm
B
Advertisement
