Refitting the transmission shaft
Tightening torque
Articulated shaft - transmission housing shaft
Articulated shaft - gearbox
Undo the six screws (5) fastening the
transmission shaft (A) to the gearbox.
Remove all the screws and retrieve the three
shims (6).
Use a sharp tool to separate the transmission
shaft flange from the transmission housing,
then ease the transmission shaft out (A)
toward the front.
Screw with control angle
of 90°
Screw with control angle
of 90°
Nm
Class
60 Nm
A
60 Nm
A