Advertisement
D3.04
Brake pads
Removing the front brake pads
Disconnect the battery (
Remove the wheels (
Remove the front wheels.
Refitting the front brake pads
Tightening torque
Centre pin - front brake pads
Further separate the calliper pistons with the tool (FACOM DF.6).
F2.01).
D2.01).
Disconnect connector (1) of brake pad wear
sensor, and detach it from the relevant
mounting bracket.
Detach brake pad wear sensor cable from cable
grommet (2).
Remove the indicated clamps.
Remove the pin (3), tapping with a suitable
punch and mallet.
Remove the spring (4).
Remove the pin (5), tapping with a suitable
punch and mallet.
Undo the screw (6).
Remove the pin (7).
Remove the brake pads (A).
Screw
Nm
Class
27 ÷ 33 Nm
0
Advertisement
