Ferrari California Workshop Manual page 898

Tightening torque
Fastening flat undertray
Removing the rear flat undertray section
Remove the rear flat undertray diffuser (
Screw
Fit the front flat undertray section, inserting the
oil drain pipe (1) in the respective hole.
Tighten the screws indicated.
Tightening torque
Screw
FROM Assembly No. 103179 (consult the Spare
Parts Catalogue to identify vehicles not
affected by modification)
Fit the front flat undertray section, inserting the
oil drain pipe (1) in the respective hole.
Tighten the screws indicated.
Tightening torque
Screw
E3.12).
Nm Class
8 Nm C
Nm Class
8 Nm
Nm Class
8 Nm
C
C