Advertisement
A3.14
Checking Blow-by system pipes and connections
Checking Blow-by system pipes and connections
Remove the engine compartment cosmetic shields (
Refit the engine compartment cosmetic shields (
E3.13).
Check the state of the pipes (1) and the tightness
of the relative clamps near the vapour
separator and the intake manifold.
Check the connections. Replace the relative pipe
and/or clamp if any leakage or sweating is
noted.
Check the state of the pipes (2) and the tightness
of the relative unions on both cylinder heads.
Replace the pipe if any leakage or sweating is
noted.
E3.13).
Advertisement
