Advertisement
Whenever a sensor is replaced, the self-acquired parameters must be deleted from the ECU memory.
Located at the rear of the right catalytic converter.
Disconnect the battery (
Remove the central flat undertray section (
Remove the front wheelhouses (
Remove the right one.
F2.01).
E3.12).
E3.05).
Detach the connector (1).
Detach the cable from the clamp (2).
Detach the cable from the clamp (3).
Undo the rear oxygen sensor (D) from the
catalytic converter and replace.
Fit the rear oxygen sensor (D) onto the catalytic
converter and tighten it.
Tightening torque
Oxygen sensor
Attach the cable to the clamp (3).
Nm
Class
50 Nm
B
Advertisement
