Advertisement
Remove the lower front suspension arm from its relevant seat.
Refitting the front suspension lower arm
Tightening torque
Fastening the lower front arm to the hub carrier
Fastening shock absorber to lower arm
Fastening spherical tie-rod - lower arm
Fastening lower arm to chassis
Support the weight of the front suspension adequately.
Clean the ball joint pin and the relevant seat on the arm to remove any grease residue.
Check again that the yellow reference markings
are correctly aligned: the markings on the
stud bolts and the markings on the Flanbloc
eyebolts must be aligned.
Nut (pretightening)
Nut
Nut
Spherical tie-rod
Nut (pretightening)
Nut
Nm
Class
90 Nm
A
63 Nm
A
80 Nm
A
50 Nm
B
25 Nm
A
60 Nm
A
Advertisement
