Advertisement
Lift the hydraulic clutch system oil pipes to allow
access to the fasteners for the left hand
injection cable (42).
Remove the clamps indicated fastening the left
hand injection cable (42).
Detach the safety fasteners (87).
Disconnect the connectors (88) from the LH
Motronic ECU (89).
Disconnect the connector (55) from the front
oxygen sensor.
Disconnect the connector (56) from the rear
oxygen sensor.
Detach the oxygen sensor cables by undoing the
indicated screws.
Disconnect the ground cable (57) by undoing the
respective screw indicated.
Advertisement
