Advertisement
Tightening torque
Fastening quarterlight assembly - bodyshell /
adjusting distance between quarterlight and
door window
Quarterlight rotation adjustment
Quarterlight/door window alignment adjustment
Quarterlight preload adjustment
Fastening front seat belt guide bracket
Remove the passenger compartment trim panels (
Only when adjusting the quarterlight, remove the upper and lower lateral trim panels.
Screw
Nut
Screw
Nut
Screw
E4.04).
Carry out the following preliminary operations
before adjusting the quarterlight.
Remove the foam rubber complete with
mounting bracket (21), undoing the two
screws indicated, then remove the bracket
from the quarterlight assembly (red arrow).
After removing the bracket, refit and tighten the
screw (22).
Tightening torque
Screw
Remove the three screws indicated fastening the
front seat belt guide bracket (20).
Lift up the length of foam rubber (19) involved if it
rides up over the quarterlight assembly.
Nm
Class
9.5 Nm
B
9.5 Nm
B
9.5 Nm
B
9 Nm
B
24 Nm
B
Nm
Class
9.5 Nm
B
Advertisement
