Advertisement
Lift the backrest and fasten to the relative latches.
Removing the rear seats
Take particular care not to damage the structure, the plastic fasteners and the leather trim
The rear seats are installed in the 2+2 Version only.
Remove the rear backrest (
Remove the passenger compartment trim panels (
Remove the lower lateral trim panels.
E4.01).
Fit the backrest (A) in the relative seat.
Tighten the four screws indicated fastening the
rear bench backrest (A).
Tightening torque
Screw
E4.04).
Prise out and remove the cover (A) for the
branch of the left hand rear seat belt from its
relative seat.
Nm
Class
12 Nm
B
Advertisement
