Advertisement
FROM Assembly No. 103179 (consult the Spare
Parts Catalogue to identify vehicles not
affected by modification)
Pre-tighten then definitively tighten the screws
(38).
Tightening torque
Screw (pretightening)
Screw
Connect the connector (37).
Perform the operations on both sides of the
vehicle.
Fit the spherical suspension tie-rod on the rear
stabiliser bar (33) and tighten the nut (32).
Perform the procedure on both sides of the
vehicle.
Tightening torque
Nut
Nm
Class
20 Nm
A
110 Nm
A
Nm
Class
50 Nm
B
Advertisement
