Advertisement
Fit and secure the left hand injection cable (42),
tightening the fastener screws for the
indicated brackets.
ONLY for vehicles WITHOUT single oil heat
exchanger
Observe the procedure described as follows to
connect the clutch hydraulic system oil pipe
unions correctly:
ensure that the notch on the safety ring nut (50)
is aligned with the pin (51);
connect the male union and turn the safety ring
nut (50) so that it is no longer aligned with the
pin (51);
ALWAYS ensure that the pipe union is effectively
connected.
ONLY for vehicles WITHOUT single oil heat
exchanger
Connect the hydraulic clutch system oil delivery
and return unions (54).
Advertisement
