Advertisement
Refitting the A.C. compressor - power steering pump - alternator drive belt
In order not to damage the belt, do not fold it with sharp corners and do not let it come into contact
with oil or fuel.
Check the tension of the A.C. compressor - power steering pump - alternator drive belt (
Refit the water pump drive belt (
Work from underneath the vehicle.
With a fixed wrench applied onto the tensioner
Remove the worn belt (B).
With a fixed wrench applied onto the tensioner
A3.12).
roller fastener screw (1), turn the mobile
tensioner counterclockwise to loosen the belt
(B) and enable its removal, first from the
pulley on the A.C. compressor, then from the
other pulleys.
To illustrate the operation more clearly, the
photo aside shows the engine removed from
the vehicle.
roller fastener screw (1), as during removal,
turn the mobile tensioner counterclockwise
and fit the new belt (B), using only the hands.
Ensure that the belt sits correctly on the
relevant pulleys.
To illustrate the operation more clearly, the
photo aside shows the engine removed from
the vehicle.
A3.12).
Advertisement
