Advertisement
Remove the intake manifold completely from the engine compartment.
Cover the intake duct orifices to prevent foreign bodies from entering.
Seal the air inlet ports on the cylinder heads by fitting tool
ducts.
Refitting the intake manifold
Tightening torque
Intake manifold - cylinder heads
Remove tool
(AV
3608) from the cylinder heads.
Open the two clamps (6) on the rear of the intake
manifold and release the low pressure fuel
line (7).
Remove the two gaskets (8) from the cylinder
heads.
(AV
3608) to keep foreign objects out of the
Screw
Nm
Class
10 Nm
B
Advertisement
