Advertisement
Detach and remove the rubber plug (D) from the
rear of the lower arm.
Holding the pin (5) fastening the shock absorber
to the lower arm still, undo the nut (6) and
retrieve the relevant washer.
Detach the tie-rod (1) for the NRRPS motion
sensor from the lower arm (A).
Magnetorheological shock absorbers (optional)
only.
Whenever the nut and/or the screw fastening
the lower rear suspension arm is or are
removed, ALWAYS REPLACE BOTH the
nut and the screw with new parts when
reassembling.
Undo the nut (2) and remove the screw (3),
retrieving the relevant washer.
Advertisement
