Advertisement
FROM Assembly No. 103179 (consult the Spare
Parts Catalogue to identify vehicles not
affected by modification)
Undo the indicated screws fastening the shock
absorber (A) to the chassis.
Using a delible yellow marker pen or paint, make
reference markings on the stud bolts and
relative nuts and the eyebolts of the Flanblocs
fastening the upper arm.
Detach the tie-rod for the NRRPS motion sensor
(2) from the upper arm (B).
Magnetorheological shock absorbers (optional)
only.
DO NOT use lubricants or electric/pneumatic
drivers.
Partially loosen the indicated nuts fastening the
upper arm (B) in the following order: (a), (b),
(c), (d).
Move the shock absorber aside to facilitate the
operation.
Advertisement
