Advertisement
CAUTION
Danger of accident! At least two operators are required to manually move the components of the RHT roof,
working slowly and in a coordinated fashion.
When handling the tonneau cover manually, the tonneau cover fastener latches may damage the
blocks fastened to the kinematics of the tonneau cover.
The blocks fastened to the kinematics of the tonneau cover protect the flaps. As a result, damage to
the blocks will also result in damage to the flaps.
Before handling the tonneau cover manually, check that the latches fastening the tonneau cover are
correctly released.
Manually close the Tonneau Cover completely.
Work with due caution, taking particular care not to damage the wiring harnesses disconnected
previously.
Detach the two hooks (15) (one per side)
fastening the luggage compartment lid to the
Tonneau Cover kinematics then open the
luggage compartment lid completely.
On the left-hand side of the luggage
compartment lid, disconnect the light
connector (6).
Advertisement
