Advertisement
Check and adjust the quarterlight (
Refit the rear seats (
Checking and adjusting the quarterlight
E3.07).
E4.01).
Place the complete quarterlight (A) in the
passenger compartment and connect the
connector (11).
Fit the complete quarterlight (A) in the relative
seat and prepare for adjustment by moving as
far back as possible.
Tighten the two screws (10), fitting the rubber
support (9) and internal window scraper seal
(12) as originally installed.
Tightening torque
Screw
Keep the quarterlight preload adjuster dowel (8)
immobilised and tighten the fastener nut (7).
Tightening torque
Nut
Nm
Class
9.5 Nm
B
Nm
Class
9 Nm
B
Advertisement
