Advertisement
Disconnect the connector (3).
Disconnect the ground cable (4), undoing the
indicated screw and retrieving the lock
washer.
CAUTION
When connecting a fuel system pipe, bear in mind
that the line may be pressurised. Proceed
therefore with caution and keep away any type
of flame as there is a risk of fuel spraying onto
the operator.
Always plug the disconnected fuel pipes to prevent
residual fuel from leaking.
Disconnect the pipe (5), detaching the indicated
union.
Use a suitable tool to prise off and remove the
safety clip (10) from the fastener ring.
Fit the tool
(AV
8175) on the fastener ring (6).
Using the tool
(AV
8175), turn the fastener ring
(6) anticlockwise to bring the lock pin into the
indicated position.
Remove tool
(AV
8175).
Remove the fastener ring (6).
Advertisement
