Advertisement
Tightening torque
suspension mounting casting
Fastening engine mounting bush to front
removable subframe
Fastening front removable subframe to
transmission housing bushing
Fastening front removable subframe to
transmission tunnel side member endpiece
Fastening reinforcement tube - front removable
subframe
Fastening front removable subframe
UP TO Assembly No. 103178 (consult the Spare Parts Catalogue to identify vehicles not affected by
modification)
UP TO Assembly No. 95408, fit the engine bush plates in the respective seats on the front removable
subframe.
Fit the front removable subframe, supporting its weight adequately.
Screw
Nut
Screw
Screw
Screw (pretightening)
Screw
Tighten the pins
threaded holes on the engine mounting
bushes.
Fit the bracket (19) on the hook (20) on the
transmission housing bushing.
Nm
50 Nm
103 Nm
110 Nm
24 Nm
20 Nm
60 Nm
(AV
8350) into the M10
Class
B
B
A
B
B
B
Advertisement
