Advertisement
Right hand bush
UP TO Assembly No. 103178, remove the bush
heat shield (1), detaching the two clips.
Remove the bracket (2), undoing the relative
fastener nut indicated.
Remove the retainer bracket from the bush.
UP TO Assembly No. 95407, undo the screw
(3) fastening the engine mounting strut to the
respective bush.
FROM Assembly No. 95408, undo the nut (3)
fastening the engine mounting strut to the
respective bush.
Remove and replace the engine mounting bush.
Fit the new bush, aligning correctly with the
respective engine mounting strut.
UP TO Assembly No. 95407, tighten the screw
(3) fastening the engine mounting strut to the
respective bush.
Tightening torque
Screw
FROM Assembly No. 95408, tighten the nut (3)
fastening the engine mounting strut to the
respective bush.
Tightening torque
Nut
Fit the retainer bracket on the bush.
Fit the bracket (2) and tighten the relative
fastener nut indicated.
UP TO Assembly No. 103178, fit the bush heat
shield (1) and fasten with the two clips.
Nm
Class
103 Nm
A
Nm
Class
103 Nm
A
Advertisement
