Advertisement
UP TO Assembly No. 103178 (consult the Spare
Parts Catalogue to identify vehicles not
affected by modification)
Detach the end (27) of the right hand EPB
Bowden cable from the EPB linkage bracket
(28).
Take care not to damage the EPB linkage
bracket (28).
Detach the end (29) of the left hand EPB
Bowden cable from the EPB equaliser (30).
Detach the EPB Bowden cable sheaths from the
mounting bracket (26) for the EPB equaliser
(30), pressing the indicated fastener clips.
Move the EPB equaliser (30 )to the left and
remove from the relative mounting bracket
(26).
Undo the two screws indicated (36) fastening the
heat shield (34 )protecting the EPB Bowden
cable (35).
Remove the heat shield (34 )protecting the EPB
Bowden cable (35) from its seat.
Undo the two screws indicated (36) fastening the
EPB Bowden cable (35) to the heat shields
on the gearbox.
Remove the EPB Bowden cable (35 )from the
heat shields on the gearbox.
Undo the nut (32) and detach the rear stabiliser
bar (33) from the left hand suspension.
Repeat the procedure on the right hand rear
suspension.
Advertisement
