Advertisement
UP TO Assembly No. 103178 (consult the Spare Parts Catalogue
to identify vehicles not affected by modification)
Tighten the indicated nuts fastening the central silencer to the
catalytic converter (B).
Tightening torque
Torx clamp
FROM Assembly No. 103179 (consult the Spare Parts Catalogue
to identify vehicles not affected by modification)
Tighten the indicated nuts fastening the central silencer to the
catalytic converter (B).
Tightening torque
Torx clamp
If the protrusion of the lateral and rear exhaust silencer mounting
pins is correct, but the protrusion of the exhaust extension
mounting pins is <24 mm, loosen the indicated screws.
Fit one or more shims (6) between the bracket (5) and the rear
removable subframe to obtain a protrusion of the exhaust
extension mounting pins of ≥24 mm.
UP TO Assembly No. 103178 (consult the Spare Parts Catalogue
to identify vehicles not affected by modification), if the
measurements comply with the values indicated
Fit both vibration dampers (3) on the central silencer and tighten
the indicated nuts.
Tightening torque
Nut
Check the tension of the exhaust system vibration
dampers (
B7.01).
Nm
Class
54.2 Nm
B
Nm
Class
54.2 Nm
B
Nm
Class
25 Nm
B
Advertisement
