Advertisement
Refit the brake discs (
D3.03).
Attach the eyebolt (6) on the right hand EPB Bowden cable (B) to the
fork (7) inside the hub carrier.
Tighten the indicated screw fastening the right hand EPB Bowden cable
sheath (B) onto the rear right hand hub carrier.
Tightening torque
Screw
Tighten the nut (5) fastening the earth cable onto the bracket on the
right hand EPB Bowden cable sheath (B).
Tightening torque
Nut
Attach the cable grommet (4) to the bracket on the right hand EPB
Bowden cable sheath (B).
Left hand parking brake cable
Press on the two indicated fastener tabs and fit the left hand EPB
Bowden cable sheath (D) into the relative mounting bracket.
Attach the end (3) of the left hand EPB Bowden cable (D) onto the EPB
equaliser (C).
Move the EPB equaliser (C) to the right.
Press on the two indicated fastener tabs and fit the right hand EPB
Bowden cable sheath (B) into the relative mounting bracket.
Attach the end (2) of the right hand EPB Bowden cable (B) onto the
EPB linkage bracket (A).
Refit the clip (1) in the relative seat on the EPB linkage bracket (A).
Nm
Class
8 Nm
B
Nm
Class
6 Nm
B
Advertisement
