Advertisement
The trolley
(AS
107565) is necessary for the
removal of the engine complete with
removable subframe.
The trolley consists of a swivelling platform (63)
with two handles (64) for locking axial
position, six alignment pins (65) with relative
swivelling and extensible mounts, a pedal
(66) for lifting the platform, and a handle
(67) for lowering the platform.
CAUTION
During the following operations, the VEHICLE
MUST ONLY BE LIFTED WITH THE ANTI-
TIPPING SAFETY RETAINERS INSTALLED.
CAUTION
For safety reasons, position the support trolley for
the removable subframe with particular care.
Remove the hydraulic jack from under the engine
oil sump ENSURING that the front removable
subframe does not move.
Place the trolley
(AS
front removable subframe with the trolley
operating handle facing toward the rear of the
vehicle.
Raise the trolley lift platform
the relative pedal to position the alignment
pins approximately 20 mm from the front
removable subframe.
Align the trolley alignment pins
the respective holes on the front removable
subframe.
Lock the trolley platform
relative handles.
107565) underneath the
(AS
107565) with
(AS
107565) with
(AS
107565) with the
Advertisement
