Advertisement
CAUTION
Danger of accident! At least two operators are required to manually move the components of the RHT roof,
working slowly and in a coordinated fashion.
When handling the tonneau cover manually, the tonneau cover fastener latches may damage the
blocks fastened to the kinematics of the tonneau cover.
The blocks fastened to the kinematics of the tonneau cover protect the flaps. As a result, damage to
the blocks will also result in damage to the flaps.
Before handling the tonneau cover manually, check that the latches fastening the tonneau cover are
correctly released.
Manually open the Tonneau Cover completely.
Adequately support the weight of luggage
compartment lid.
This operation requires at least two
operators.
Fit the connector with cable into the hole on the
luggage compartment lid.
Fasten the cable grommet (8) onto the luggage
compartment lid with the clamp (7).
Tighten, applying the shims removed during
disassembly, the two screws (9) fastening the
hinge to the luggage compartment lid.
When refitting the same luggage compartment
lid, use the original shims.
When fitting a new luggage compartment lid,
reuse the original shims as an initial
guideline.
On the left-hand side of the luggage
compartment lid, connect the light connector
(6).
Advertisement
