Advertisement
Tightening torque
ABS/ASR ECU - mounting bracket
Fastening brake pipe union or connection
Brake pipe union or connection
Screw
M10 union
M12 Union
Check the state of the three mounting bushings
(7) for the electrohydraulic ABS/ASR unit and
replace if necessary.
Fit the electrohydraulic ABS/ASR unit (A) in the
relative seat on the mounting bracket, via the
compartment revealed by the removal of the
battery.
Tighten screws (6) from underneath, and screw
(5) from above.
Tightening torque
Screw
Nm
Class
18 Nm
B
16 Nm
B
16 Nm
B
Nm
Class
18 Nm
B
Advertisement
