Advertisement
The tyre pressure monitoring sensor is installed on the wheel rims, near the inflation valve.
Removing the tyre without using the correct tools and taking the necessary precautions may damage
the sensor.
To avoid this problem, we are showing the entire procedure for removal and refitting of the tyres from the
wheel rim, using a CORGHI tool, model Artiglio A2019 RC (shown in the photo) or Artiglio A2020 TI,
recommended by Ferrari.
To prevent damage to the wheel rim, all parts of the tool that may come into contact with the rim are rubber
coated.
Only use rubberised tools.
Wear gloves and protective eyewear.
Advertisement
