Advertisement
Tightening torque
Exhaust extension mounting bracket - chassis
Exhaust extension mounting bushings - mounting
bracket
Centre silencer - catalytic converter
Damper - central silencer
Exhaust extension - centre silencer
Exhaust extension - silencer
Fastening heat shields to rear removable
subframe
Fastening silencer connector cross member
Screw
Nut
Torx clamp
Nut
Torx clamp
Spherical clamp
Screw
Screw
Nut
Apply an even layer (8) approximately 15 mm
wide of HOLTS FIREGUM sealant paste
onto the mating surfaces of both of the rear
pipes of the central silencer with the exhaust
extensions.
Fill the notches (9) in both connecting endpieces
of the exhaust extensions with HOLTS
FIREGUM sealant paste.
Apply an even layer (11) approximately 15 mm
wide of HOLTS FIREGUM sealant paste
onto both of the rear pipes of the catalytic
converters, on the mating surfaces with the
central silencer.
Fill the notches (12) in both connecting
endpieces of the central silencer with HOLTS
FIREGUM sealant paste.
Nm
Class
25 Nm
B
10 Nm
B
54.2 Nm
B
25 Nm
B
54.2 Nm
B
35 Nm
B
8 Nm
B
25 Nm
B
25 Nm
B
Advertisement
