Advertisement
B7.04
Centre silencer
Removing the centre silencer
Never reuse exhaust system clamps and gaskets that have been subjected to operating temperature.
Always replace with new components.
Only new exhaust system clamps and gaskets may be removed and refitted for adjustment purposes
during initial installation.
Remove the rear flat undertray diffuser (
Remove the rear flat undertray section (
Apply AREXONS SVITOL TECHNIK SILIKON SPRAY to the joints between the components of the
exhaust system to be removed, leaving the product to act for a few minutes.
E3.12).
E3.12).
Undo the screws indicated.
Remove the connector cross member (Z).
For vehicles with single oil heat exchanger
Undo the screws indicated.
Remove the connector cross member (Z).
Advertisement
