Ferrari California Workshop Manual page 698

Hide thumbs Also See for California:

Loosen the ring nut (A) using a standard pin

Tighten or loosen the spring retainer cap (B) to

obtain the length (L).

The length (L) from the spring retainer to the

lower fulcrum axis must be adjusted in

relation to the type of spring fitted and the

type of shock absorber on which the spring

is installed. Two different spring sizes are

available with different control load

tolerances. These are identifiable by a

coloured marking stamped on a coil turn.

FROM Assembly No. 103179, consult the

Spare Parts Catalogue to identify

vehicles not affected by modification.

Length of front fixed setting shock absorbers

Fixed setting front shock absorber length, FROM

Assembly No. 103179 (consult the Spare

Parts Catalogue to identify vehicles not

affected by modification)

Length of rear fixed setting shock absorbers

Fixed setting rear shock absorber length, FROM

Assembly No. 103179 (consult the Spare

Parts Catalogue to identify vehicles not

affected by modification)

Length of front variable setting shock absorbers