Advertisement
Loosen the nuts indicated fastening the bushings
(1) to the mounting bracket.
Pulling toward the rear of the vehicle, remove the
exhaust extensions (D), complete with
bushings (1), from the mounting bracket.
Undo the two screws (2) and the nut (10), then
remove the bracket.
Move the exhaust extensions (D) as far toward
the rear of vehicle as possible to permit
removal from the centre silencer.
UP TO Assembly No. 85744
Working from under the vehicle, remove the
retainer clips (22) from the emergency
gearbox lock releaser.
Remove the Bowden cables (23) from the
relevant blocks.
Remove the Seeger rings (24) and remove the
cables, leading towards the passenger
compartment, from the retainer bracket (25).
UP TO Assembly No. 103178 (consult the Spare
Parts Catalogue to identify vehicles not
affected by modification)
Use a suitable screwdriver to prise the clip (92)
off the EPB linkage bracket.
Advertisement
