Advertisement
E3.11
Door perimeter trim panels
Removing the kickplate
The following procedure is for removing the left hand kickplate.
The procedure for removing the right hand kickplate is identical.
Refitting the kickplate
The following procedure is for refitting the left hand kickplate.
The procedure for refitting the right hand kickplate is identical.
Detach the door bay perimeter seal strip (A).
Using a suitable tool, detach and remove the
kickplate (B).
If necessary, remove the strips (1) of double
sided adhesive tape applied to the inner
surface of the kickplate (B).
Ensure that the inner surface of the kickplate (B)
is clean. If necessary, clean with a
degreasing product.
Apply new strips (1) of double sided adhesive
tape to the inner surface of the kickplate (B),
in the same positions as before.
Advertisement
