Advertisement
D4.07
Vehicle set-up
Checking vehicle set-up
Check tightness of wheel fasteners.
Check that the tyre pressure is correct.
Check that the steering box functions correctly.
Check that the suspension components function correctly.
Place the vehicle on a wheel alignment lift, filled with all fluids as necessary and with the electric
parking brake engaged.
For this procedure, the fuel tank must be full and all fluids must be filled to the correct levels.
Check that the vehicle setup parameters comply with the specifications given in the "Vehicle Setup
Parameter Check Form".
The vehicle parameters specified in the "Vehicle Setup Parameter Check Form" are given in chapter
A3.22.
If the vehicle setup parameters measures for the vehicle do not comply with the specifications of
the "Vehicle Setup Parameter Check Form", adjust the vehicle setup accordingly.
Adjusting the vehicle suspension/wheel alignment
The vehicle parameters specified for each version in the "Vehicle Setup Parameter Check Form" are given in
chapter A3.22.
Height check
With the vehicle arranged as specified above, the correct height of the vehicle measured between the ground
and the front section of the chassis, measured in relation to the point (A) (internal surface of the hole),
must correspond to the specified set-up values.
Advertisement
