Advertisement
Adjust the shock absorber length (
Refit the rear shock absorbers (
Refit the front shock absorbers (
Adjusting the shock absorber length
Tightening torque
Fastening shock absorber stop cap
Apply grease Z2 PROTECTION to the surface of
Fit the lower shim (E) on the shock absorber.
Fit the plug (D).
Fit the spring (A).
Apply grease Z2 PROTECTION to the surface of
Fit the upper shim (C) on the shock absorber.
Fit the bushing (4).
Fit the upper stop cap (B), complete with
Compress the spring (A) with a suitable press.
Do not release the spring until the nut is tightened
Apply thread lock AREXONS SYSTEM 52A43 -
Tightening torque
Nut
Tighten the nut complete with connector (1).
Tightening torque
Nut
Slowly release the spring (A).
D4.04).
D4.04).
D4.04).
Ring nut
the lower shim (E) in contact with the spring
(A).
the upper shim (D) in contact with the spring
(A).
hyperblock.
CAUTION
onto the shock absorber strut.
MEDIUM STRENGTH THREAD LOCK to the
thread of the strut and, installing the relative
washer (3), tighten the nut (2).
Nm
Class
40 Nm
Nm
Class
40 Nm
Nm
Class
65 Nm
B
A
A
Advertisement
