Advertisement
Refit the rear flat undertray section (
Check the fluid level with the level pipe (2): the
fluid must reach the upper edge of the pipe,
on the limit of overflowing.
If the level is too low, identify the possible
If the level is too low (oil not overflowing), top up
as follows.
Using the pump
long spout), aspirate the specified oil from a
newly opened container.
Using the pump
and a container for collecting excess oil, top
up via the level pipe until excess oil overflows.
Let the oil fluid completely until the flow stops.
Replace and tighten the threaded plug (1).
Tightening torque
Plug
E3.12).
causes for excessive consumption before
refilling.
(AV
8174) element 02 (with the
(AV
8174) with attachment 02
Nm
Class
25 Nm
B
Advertisement
