Advertisement
Take care not to contaminate the systems.
Clean the unions on the single oil heat
exchanger and the surrounding areas with a
suitable degreaser that does not leave
residue.
Place a container under the clamp indicated by
the red arrow.
Detach the coolant return pipe (2) from the single
oil heat exchanger (A) by loosening the clamp
indicated by the red arrow.
Pour the fluid drained from the system into a
container and seal it. DO NOT DISPOSE
OF USED FLUID IN THE
ENVIRONMENT.
Detach the coolant return pipe (2) and allow the
liquid in the pipe to drain.
Clean and dry any fluid residue.
Place suitable plugs on the inlets.
Place a container under the unions of the clutch
hydraulic system pipes (3) on the single oil
heat exchanger.
Remove the clutch hydraulic system pipes (3)
from the single oil heat exchanger (A), by
undoing the indicated screws and retrieving
the retainer forks (5).
ALWAYS dispose of liquids correctly in
accordance with applicable legislation.
Collect all liquids drained from the vehicle
systems in appropriate airtight containers,
then close the containers.
Detach the clutch hydraulic system pipes (3) and
allow the liquid remaining in the pipes to drain.
Clean and dry any fluid residue.
Place suitable plugs on the inlets.
Place a container under the gear oil pipe unions
(4) on the single oil heat exchanger.
Remove the gear oil pipes (4) from the single oil
heat exchanger (A), by undoing the indicated
screws and retrieving the retainer forks (5).
ALWAYS dispose of liquids correctly in
accordance with applicable legislation.
Collect all liquids drained from the vehicle
systems in appropriate airtight containers,
then close the containers.
Detach the gear oil pipes (4) and allow the liquid
remaining in the pipes to drain.
Clean and dry any fluid residue.
Place suitable plugs on the inlets.
Advertisement
